Searchable Class Schedule
Canvas Login InstructionsHome>
Class Schedule
Announcements
Phase I of a state-mandated initiative — aimed at simplifying student transfer and ensuring uniformity
in course numbers across California Community Colleges — is underway for Fall 2025. This impacts six Foothill courses plus their honors course
version. View the six courses listed here.
When viewing a course in the schedule of classes, you will see a letter at the end
of the class course section number IF that class is NOT being taught FULLY in person
on campus. View section letter code definitions.
Foothill offers many courses with free ($0) or low-cost (under $30) materials.
To find them In the Searchable Class Schedule, open the Textbooks dropdown filter and select:
- No Cost ($0)
- Less than < $30
Courses with free materials will display $0 in the schedule.
Searchable Class Schedule
9 classes scheduled
ENGR 6
ENGINEERING GRAPHICS
4 units
- Description: The application of orthographic projection to detail and assembly drawings, with examples from various engineering fields. Geometric construction, sketching, dimensioning for interchangeable assembly and specification of materials. Graphical analysis, documentation, and presentation of engineering information. Theory of orthographic projection and its application to graphical solution of the more advanced three-dimensional space problems. Investigation of relationships between points, lines, planes, and solids. Use of solid modeling computer program in carrying out the above course components.
- Prerequisite: MATH 48C or equivalent.
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 3 hours lecture per week, 3 hours lab per week. 72 hours total per quarter.
- Foothill GE Area:
- Transferability: Both
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-006.-01
Course Number (CRN):
21363
Dates:
9/23/2024 - 12/13/2024
| Modality | Textbook(s) | Footnote |
|---|---|---|
| Check Bookstore | n/a |
ENGR 10
INTRODUCTION TO ENGINEERING
5 units
- Description: A first experience in engineering, this course is open to all students intending to major in engineering or who want to try out engineering. Students will gain experience with project management and design, insights from discussions on ethics and environmental impact, and skills in written and oral technical communication.
- Prerequisite:
- Corequisite:
- Advisory: Advisory: UC will accept for transfer credit either ENGR 10 or ENGR 49, not both; not open to students with credit in ENGR 20.
- Repeatability: Not Repeatable.
- Hours: 4 hours lecture per week, 3 hours lab per week. 84 hours total per quarter.
- Foothill GE Area:
- Transferability: Both
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-010.-01
Course Number (CRN):
20909
Dates:
9/23/2024 - 12/13/2024
| Modality | Textbook(s) | Footnote |
|---|---|---|
| Check Bookstore | n/a |
ENGR 35
STATICS
5 units
- Description: Principles of statics as applied to particles and rigid bodies in two and three dimensions under concentrated and distributed force systems. Equilibrium conditions in structures, machines, beams, and cables. Determination of centroids and moments of inertia. Dry friction and methods of virtual work.
- Prerequisite: Prerequisites: MATH 1B or 1BH; PHYS 4A.
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 5 hours lecture per week. 60 hours total per quarter.
- Foothill GE Area:
- Transferability: Both
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-035.-01
Course Number (CRN):
22426
Dates:
9/23/2024 - 12/13/2024
| Type | Room | Day & Time | Instructor |
|---|---|---|---|
| Lecture | 4605 | MW 1:00 PM-3:15 PM | PARIKH, SARAH |
| Modality | Textbook(s) | Footnote |
|---|---|---|
| Check Bookstore | n/a |
ENGR 70R
INDEPENDENT STUDY IN ENGINEERING
1 unit
- Description: Provides an opportunity for the student to expand their studies in Engineering beyond the classroom by completing a project or an assignment arranged by agreement between the student and instructor. The student is required to contract with the instructor to determine the scope of assignment and the unit value assigned for successful completion. Students may take a maximum of 6 units of Independent Study per department.
- Prerequisite:
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 3 hours lab per week. 36 hours total per quarter.
- Foothill GE Area:
- Transferability: CSU
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-070R-01
Course Number (CRN):
20943
Dates:
9/23/2024 - 12/13/2024
| Type | Room | Day & Time | Instructor |
|---|---|---|---|
| Lecture | TBA | TBA TBA | STAFF, M |
ENGR 71R
INDEPENDENT STUDY IN ENGINEERING
2 units
- Description: Provides an opportunity for the student to expand their studies in Engineering beyond the classroom by completing a project or an assignment arranged by agreement between the student and instructor. The student is required to contract with the instructor to determine the scope of assignment and the unit value assigned for successful completion. Students may take a maximum of 6 units of Independent Study per department.
- Prerequisite:
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 6 hours lab per week. 72 hours total per quarter.
- Foothill GE Area:
- Transferability: CSU
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-071R-01
Course Number (CRN):
20940
Dates:
9/23/2024 - 12/13/2024
| Type | Room | Day & Time | Instructor |
|---|---|---|---|
| Lecture | TBA | TBA TBA | STAFF, M |
ENGR 72R
INDEPENDENT STUDY IN ENGINEERING
3 units
- Description: Provides an opportunity for the student to expand their studies in Engineering beyond the classroom by completing a project or an assignment arranged by agreement between the student and instructor. The student is required to contract with the instructor to determine the scope of assignment and the unit value assigned for successful completion. Students may take a maximum of 6 units of Independent Study per department.
- Prerequisite:
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 9 hours lab per week. 108 hours total per quarter.
- Foothill GE Area:
- Transferability: CSU
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-072R-01
Course Number (CRN):
20941
Dates:
9/23/2024 - 12/13/2024
| Type | Room | Day & Time | Instructor |
|---|---|---|---|
| Lecture | TBA | TBA TBA | STAFF, M |
ENGR 73R
INDEPENDENT STUDY IN ENGINEERING
4 units
- Description: Provides an opportunity for the student to expand their studies in Engineering beyond the classroom by completing a project or an assignment arranged by agreement between the student and instructor. The student is required to contract with the instructor to determine the scope of assignment and the unit value assigned for successful completion. Students may take a maximum of 6 units of Independent Study per department.
- Prerequisite:
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 12 hours lab per week. 144 hours total per quarter.
- Foothill GE Area:
- Transferability: CSU
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-073R-01
Course Number (CRN):
20942
Dates:
9/23/2024 - 12/13/2024
| Type | Room | Day & Time | Instructor |
|---|---|---|---|
| Lecture | TBA | TBA TBA | STAFF, M |
ENGR 101A
ADVANCED MANUFACTURING
5 units
- Description: This course provides an understanding of industry technology and exposure to advanced manufacturing, pneumatics, electronics, mechatronics, and vacuum systems.
- Prerequisite:
- Corequisite:
- Advisory:
- Repeatability: Not Repeatable.
- Hours: 5 hours lecture per week. 60 hours total per quarter.
- Foothill GE Area:
- Transferability: None
- Transfer GE: Information regarding how this course is applied toward CSU GE/Breadth or IGETC certification is available at:
- Foothill Transfer GE Guide
Department Note:
Section:
ENGR-101A-01
Course Number (CRN):
22291
Dates:
9/23/2024 - 12/13/2024
| Modality | Textbook(s) | Footnote |
|---|---|---|
| Check Bookstore | n/a |
Section:
ENGR-101A-02A
Course Number (CRN):
22292
Dates:
9/23/2024 - 12/13/2024
| Modality | Textbook(s) | Footnote |
|---|---|---|
| Check Bookstore | n/a |
Keep Exploring
Love Your Learning at Foothill College.