Physical Sciences, Mathematics & Engineering Division **|** Department Website

Engineers apply the theories and principles of science and mathematics to practical technical problems. The engineering major provides a solid foundation in what is normally referred to as the "engineering core" at most colleges and universities. Mathematics, physics, chemistry and introductory engineering courses such as circuit analysis and statics make up the bulk of this core. The major is intended to provide, in most cases, all of the basic subjects necessary for a smooth transfer to the candidate's chosen college or university.

• Students will be able to formulate logical problem-solving approaches, generate solutions, and assess the reasonableness of the solutions for engineering-type analysis problems.

• Students will be able to design, construct, and produce creative solutions to engineering problems by applying the engineering design process and identifying pertinent design parameters based on the fundamental physics governing a system.

• Students will be able to demonstrate understanding of the fundamental knowledge necessary for the practice of, or for advanced study in, engineering, including scientific principles, rigorous analysis, and problem solving.

• Students will be able to demonstrate clear communication skills, responsible teamwork, professional attitudes and ethics.

• Students will be able to demonstrate a preparation for the complex work environment and continuous learning.

Engineering - in particular, electrical and computer engineering - continues to be an excellent choice for a career. It is the second largest profession, being exceeded only by teaching. Salaries at the entry level begin at about $50,000 and may go as high as $70,000 for particular specializations.

• English proficiency: ENGL 1A, 1AH, 1S & 1T, ESLL 26 or equivalent.

• Mathematics proficiency: MATH 17, 105, 108 or equivalent.

A minimum of 90 units is required* to include:

• Completion of one of the following general education patterns: Foothill General Education, CSU General Education Breadth Requirements or the Intersegmental General Education Transfer Curriculum (IGETC)

• Core courses (53 units)

• Support courses (15 units)

*Additional elective course work may be necessary to meet the 90-unit minimum requirement for the associate degree.

**NOTE:** All courses pertaining to the major must be taken for a letter grade. In addition, a grade of "C" or better is required for all core and support courses used for the degree.

CP = Certificate of Proficiency [Non-Transcriptable].

**Suggested Preparation Courses:**

• **MATH 1A** or equivalent;

• **MATH 48C** or equivalent;

• **CHEM 25** or equivalent;

• **PHYS 2A, 6** or equivalent.

**NOTE:** Students should check with the transfer institution for any additional required courses.

CHEM 1A General Chemistry (5 units)

**or** CHEM 1AH Honors General Chemistry (5 units)

CHEM 1B General Chemistry (5 units)

**or** CHEM 1BH Honors General Chemistry (5 units)

ENGR 10 Introduction to Engineering (5 units)

MATH 1B Calculus (5 units)

MATH 1C Calculus (5 units)

MATH 1D Calculus (5 units)

MATH 2A Differential Equations (5 units)

PHYS 4A General Physics (Calculus) (6 units)

PHYS 4B General Physics (Calculus) (6 units)

PHYS 4C General Physics (Calculus) (6 units)

C S 1A Object-Oriented Programming Methodologies in Java (4.5 units)

**or** C S 1AH Honors Object-Oriented Programming Methodologies in Java (4.5 units)

C S 2A Object-Oriented Programming Methodologies in C++ (4.5 units)

**or** C S 2AH Honors Object-Oriented Programming Methodologies in C++ (4.5 units)

ENGR 6 Engineering Graphics (4 units)

ENGR 11 Programming & Problem-Solving in MATLAB (5 units)

ENGR 12 Computer Architecture & Organization (5 units)

ENGR 35 Statics (5 units)

ENGR 37 Introduction to Circuit Analysis (5 units)

ENGR 45 Properties of Materials (5 units)

ENGR 62A Introduction to 3-D Printing & Rapid Prototype Design (4 units)

ENGR 62B Basic Model Making (5 units)

ENGR 62C 3-D Printing: Advanced Model Making (5 units)

ENGR 62D 3-D Rapid Model Making & Prototype Development (5 units)

ENGR 83A Introduction to Biomedical Engineering (5 units)

ENGR 83B Design & Manufacturing in the Biomedical Engineering Field (5 units)

ENGR 83C Introduction to Medical Device Regulations (5 units)

ENGR 83D Introduction to Quality Assurance (5 units)

MATH 2B Linear Algebra (5 units)

NANO 10 Introduction to Nanotechnology (5 units)

PHYS 4D General Physics (Calculus) (6 units)

ENGR 6 Engineering Graphics (4 units)

ENGR 83A Introduction to Biomedical Engineering (5 units)

ENGR 83B Design & Manufacturing in the Biomedical Engineering Field (5 units)

ENGR 83C Introduction to Medical Device Regulations (5 units)

ENGR 83D Introduction to Quality Assurance (5 units)

ENGR 6 Engineering Graphics (4 units)

ENGR 62A Introduction to 3-D Printing & Rapid Prototype Design (4 units)

ENGR 62B Basic Model Making (5 units)

ENGR 62C 3-D Printing: Advanced Model Making (5 units)

ENGR 62D 3-D Rapid Model Making & Prototype Development (5 units)

FOOTHILL COLLEGE - 12345 EL MONTE ROAD, LOS ALTOS HILLS, CA 94022-4599 - foothill.edu

**Control Information:**

2017-2018 |
Status: Approved |
Modified: 2017-04-11 09:39:43 |
Dept Code: ENGR